O*NET-SOC 47-2051.00

Cement Masons and Concrete Finishers

Smooth and finish surfaces of poured concrete, such as floors, walks, sidewalks, roads, or curbs using a variety of hand and power tools. Align forms for sidewalks, curbs, or gutters; patch voids; and use saws to cut expansion joints.

From O*NET 30.3

Tasks

From O*NET 30.3, by importance, as O*NET OnLine lists them

Free · O*NET 30.3

Check the forms that hold the concrete to see that they are properly constructed.Core7047
Set the forms that hold concrete to the desired pitch and depth, and align them.Core7048
Spread, level, and smooth concrete, using rake, shovel, hand or power trowel, hand or power screed, and float.Core7049
Monitor how the wind, heat, or cold affect the curing of the concrete throughout the entire process.Core7051
Mold expansion joints and edges, using edging tools, jointers, and straightedge.Core7050
Signal truck driver to position truck to facilitate pouring concrete, and move chute to direct concrete on forms.Core7052
Direct the casting of the concrete and supervise laborers who use shovels or special tools to spread it.Core7055
Produce rough concrete surface, using broom.Core7053
Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surface.Core7061
Operate power vibrator to compact concrete.Core7054
Install anchor bolts, steel plates, door sills and other fixtures in freshly poured concrete or pattern or stamp the surface to provide a decorative finish.Core7069
Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel.Core7059
Waterproof or restore concrete surfaces, using appropriate compounds.Core7068
Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.Core7056
Chip, scrape, and grind high spots, ridges, and rough projections to finish concrete, using pneumatic chisels, power grinders, or hand tools.Core7062
Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.Supplemental7065
Cut out damaged areas, drill holes for reinforcing rods, and position reinforcing rods to repair concrete, using power saw and drill.Core7057
Wet concrete surface, and rub with stone to smooth surface and obtain specified finish.Core7058
Fabricate concrete beams, columns, and panels.Supplemental7067
Polish surface, using polishing or surfacing machine.Supplemental7072
Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.Core7060
Build wooden molds, and clamp molds around area to be repaired, using hand tools.Core7064
Cut metal division strips, and press them into terrazzo base so that top edges form desired design or pattern.Supplemental7066
Push roller over surface to embed chips in surface.Supplemental7071
Apply muriatic acid to clean surface, and rinse with water.Supplemental7070
Spread roofing paper on surface of foundation, and spread concrete onto roofing paper with trowel to form terrazzo base.Supplemental7063

Technology Skills

From O*NET 30.3, 10 examples in 4 categories, 0 Hot Technology

Free · O*NET 30.3

Information retrieval or search software

ACT Contractors Forms

Analytical or scientific software

ADAPT-Modeler
HIPERPAV
LogicSphere Firstmix
Shilstone seeMIX

Project management software

Hard Dollar HD Project Estimating
Maxwell Systems Quest Estimator
National Concrete & Masonry Estimator
Tradesman's Software Master Estimator

Accounting software

Sirus GT Construction Accounting

Detailed Work Activities

From O*NET 30.3, under their work activities; open one for the AI skills Workforce Automation maps to it

Free · O*NET 30.3

Monitoring Processes, Materials, or Surroundings

Monitor construction operations.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Inspecting Equipment, Structures, or Materials

Inspect completed work to ensure proper installation.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Performing General Physical Activities

Mix substances or compounds needed for work activities.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Clean surfaces in preparation for work activities.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Finish concrete surfaces.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Prepare surfaces for finishing.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Pour materials into or on designated areas.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Compact materials to create level bases.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Spread concrete or other aggregate mixtures.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Handling and Moving Objects

Install building fixtures.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Install roofing materials.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Install masonry materials.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Install metal structural components.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Fabricate parts or components.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Drill holes in construction materials.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Apply sealants or other protective coatings.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Build construction forms or molds.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Apply material to fill gaps in surfaces.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Position structural components.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Apply decorative masonry finishes.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Cut metal components for installation.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Smooth surfaces with abrasive materials or tools.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Position construction forms or molds.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Controlling Machines and Processes

Break up rock, asphalt, or concrete.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Coordinating the Work and Activities of Others

Signal equipment operators to indicate proper equipment positioning.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Guiding, Directing, and Motivating Subordinates

Direct construction or extraction personnel.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Job Zone

From O*NET 30.3

Free · O*NET 30.3

Job Zone 1-2: Very Little to Some Preparation Needed

Workforce Automation analysis, not part of the source

WFA coverage: AI skills for this job

WFA · Part of the paid plan when accounts open

Pilot mapping: these skill links come from our seed list and haven’t been reviewed yet. Expect them to change as each one is checked.

DWAs covered by an AI skill0 of 26

Distinct tools0

Level mix

No tools yet

Equivalents

NICE work roles, with their DCWF equivalents

Mapped to this job by the ETO-CSET NICE/O*NET crosswalk (2024); roles from NICE Framework Components v2.2.0, DCWF equivalents from DoD DCWF Tool v5.3 (2026-09-25)

Free · NICE Framework Components v2.2.0 and DoD DCWF Tool v5.3 (2026-09-25)

No NICE work role maps to this job.