O*NET-SOC 49-2021.00

Radio, Cellular, and Tower Equipment Installers and Repairers

Repair, install, or maintain mobile or stationary radio transmitting, broadcasting, and receiving equipment, and two-way radio communications systems used in cellular telecommunications, mobile broadband, ship-to-shore, aircraft-to-ground communications, and radio equipment in service and emergency vehicles. May test and analyze network coverage.

From O*NET 30.3

Tasks

From O*NET 30.3, by importance, as O*NET OnLine lists them

Free · O*NET 30.3

Inspect completed work to ensure all hardware is tight, antennas are level, hangers are properly fastened, proper support is in place, or adequate weather proofing has been installed.Core19401
Climb towers to access components, using safety equipment, such as full-body harnesses.Supplemental19411
Run appropriate power, ground, or coaxial cables.Core19409
Test operation of tower transmission components, using sweep testing tools or software.Core19410
Install all necessary transmission equipment components, including antennas or antenna mounts, surge arrestors, transmission lines, connectors, or tower-mounted amplifiers (TMAs).Core19402
Read work orders, blueprints, plans, datasheets or site drawings to determine work to be done.Core19407
Climb communication towers to install, replace, or repair antennas or auxiliary equipment used to transmit and receive radio waves.Supplemental19400
Replace existing antennas with new antennas as directed.Core19408
Lift equipment into position, using cranes and rigging tools or equipment, such as gin poles.Supplemental19405
Bolt equipment into place, using hand or power tools.Core19398
Install, connect, or test underground or aboveground grounding systems.Core19404
Perform maintenance or repair work on existing tower equipment, using hand or power tools.Supplemental19406
Locate tower sites where work is to be performed, using mapping software.Supplemental19413
Complete reports related to project status, progress, or other work details, using computer software.Core19412
Check antenna positioning to ensure specified azimuths or mechanical tilts and adjust as necessary.Core19399
Install or repair tower lighting components, including strobes, beacons, or lighting controllers.Supplemental19403
Transport equipment to work sites, using utility trucks and equipment trailers.Core19415
Take site survey photos or photos of work performed, using digital cameras.Core19414
Calibrate and align components, using scales, gauges, and other measuring instruments.23510
Examine malfunctioning radio equipment to locate defects such as loose connections, broken wires, or burned-out components, using schematic diagrams and test equipment.23511
Insert plugs into receptacles and bolt or screw leads to terminals to connect equipment to power sources, using hand tools.23512
Install, adjust, and repair stationary and mobile radio transmitting and receiving equipment and two-way radio communication systems.23513
Monitor radio range stations to detect transmission flaws and adjust controls to eliminate flaws.23514
Mount equipment on transmission towers and in vehicles such as ships or ambulances.23515
Remove and replace defective components and parts such as conductors, resistors, semiconductors, and integrated circuits, using soldering irons, wire cutters, and hand tools.23516
Repair circuits, wiring, and soldering, using soldering irons and hand tools to install parts and adjust connections.23517
Test batteries, using hydrometers and ammeters, and charge batteries as necessary.23518
Test emergency transmitters to ensure their readiness for immediate use.23519
Test equipment functions such as signal strength and quality, transmission capacity, interference, and signal delay, using equipment such as oscilloscopes, circuit analyzers, frequency meters, and wattmeters.23520
Turn setscrews to adjust receivers for maximum sensitivity and transmitters for maximum output.23521

Technology Skills

From O*NET 30.3, 15 examples in 12 categories, 7 Hot Technology

Free · O*NET 30.3

Analytical or scientific software

AERONET calculator
Sweep analysis software
Zoho WebNMS Cell Tower Manager

Web platform development software

Backbone.js

Geographic information system

Caliper Maptitude

Facilities management software

Computerized maintenance management system CMMS
Maintenance documentation software

Map creation software

Location mapping software

Spreadsheet software

Microsoft ExcelHot TechnologyIn Demand

Office suite software

Microsoft Office softwareHot TechnologyIn Demand

Electronic mail software

Microsoft OutlookHot TechnologyIn Demand

Presentation software

Microsoft PowerPointHot TechnologyIn Demand

Project management software

Microsoft ProjectHot Technology

Operating system software

Microsoft WindowsHot Technology

Word processing software

Microsoft WordHot TechnologyIn Demand

Detailed Work Activities

From O*NET 30.3, under their work activities; open one for the AI skills Workforce Automation maps to it

Free · O*NET 30.3

Getting Information

Read work orders or descriptions of problems to determine repairs or modifications needed.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Gather information about work conditions or locations.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Inspecting Equipment, Structures, or Materials

Inspect completed work to ensure proper functioning.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Inspect safety equipment to ensure proper functioning.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Inspect telecommunications equipment to identify problems.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Test communications equipment to ensure proper functioning.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Test electrical equipment or systems to ensure proper functioning.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Test electrical circuits or components for proper functioning.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Performing General Physical Activities

Move large objects using heavy equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Climb equipment or structures to access work areas.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Handling and Moving Objects

Lay cables to connect equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Connect electrical components or equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Solder parts or connections between parts.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Assemble electrical components, subsystems, or systems.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Bolt objects into place.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Adjust the tension of nuts or bolts.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Control power supply connections.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Adjust equipment to ensure optimal performance.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Calibrate equipment to specifications.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Install electrical components, equipment, or systems.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Install audio or communications equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Position equipment using hand tools, power tools, or heavy equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Controlling Machines and Processes

Operate cranes, hoists, or other moving or lifting equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Repairing and Maintaining Mechanical Equipment

Replace worn, damaged, or defective mechanical parts.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Repairing and Maintaining Electronic Equipment

Maintain work equipment or machinery.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Repair electrical circuits or wiring.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Repair electronic equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Repair electrical components.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Documenting/Recording Information

Record images needed to address work issues.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Document operational activities.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Job Zone

From O*NET 30.3

Free · O*NET 30.3

Job Zone Three: Medium Preparation Needed

Workforce Automation analysis, not part of the source

WFA coverage: AI skills for this job

WFA · Part of the paid plan when accounts open

Pilot mapping: these skill links come from our seed list and haven’t been reviewed yet. Expect them to change as each one is checked.

DWAs covered by an AI skill0 of 31

Distinct tools0

Level mix

No tools yet

Equivalents

NICE work roles, with their DCWF equivalents

Mapped to this job by the ETO-CSET NICE/O*NET crosswalk (2024); roles from NICE Framework Components v2.2.0, DCWF equivalents from DoD DCWF Tool v5.3 (2026-09-25)

Free · NICE Framework Components v2.2.0 and DoD DCWF Tool v5.3 (2026-09-25)

No NICE work role maps to this job.