O*NET-SOC 49-2092.00

Electric Motor, Power Tool, and Related Repairers

Repair, maintain, or install electric motors, wiring, or switches.

From O*NET 30.3

Tasks

From O*NET 30.3, by importance, as O*NET OnLine lists them

Free · O*NET 30.3

Inspect and test equipment to locate damage or worn parts and diagnose malfunctions, or read work orders or schematic drawings to determine required repairs.Core11696
Verify and adjust alignments and dimensions of parts, using gauges and tracing lathes.Supplemental11713
Reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters.Core11690
Measure velocity, horsepower, revolutions per minute (rpm), amperage, circuitry, and voltage of units or parts to diagnose problems, using ammeters, voltmeters, wattmeters, and other testing devices.Core11688
Repair and rebuild defective mechanical parts in electric motors, generators, and related equipment, using hand tools and power tools.Core11692
Lift units or parts such as motors or generators, using cranes or chain hoists, or signal crane operators to lift heavy parts or subassemblies.Core11702
Record repairs required, parts used, and labor time.Core11689
Disassemble defective equipment so that repairs can be made, using hand tools.Core11701
Adjust working parts, such as fan belts, contacts, and springs, using hand tools and gauges.Core11705
Steam-clean polishing and buffing wheels to remove abrasives and bonding materials, and spray, brush, or recoat surfaces as necessary.Supplemental11720
Set machinery for proper performance, using computers.Supplemental11710
Lubricate moving parts.Core11699
Read service guides to find information needed to perform repairs.Core11695
Inspect electrical connections, wiring, relays, charging resistance boxes, and storage batteries, following wiring diagrams.Core11694
Test equipment for overheating, using speed gauges and thermometers.Supplemental11714
Reface, ream, and polish commutators and machine parts to specified tolerances, using machine tools.Supplemental11704
Maintain stocks of parts.Supplemental11691
Cut and form insulation, and insert insulation into armature, rotor, or stator slots.Supplemental11709
Scrape and clean units or parts, using cleaning solvents and equipment such as buffing wheels.Core11707
Assemble electrical parts such as alternators, generators, starting devices, and switches, following schematic drawings and using hand, machine, and power tools.Supplemental11698
Solder, wrap, and coat wires to ensure proper insulation.Supplemental11697
Rewire electrical systems, and repair or replace electrical accessories.Supplemental11693
Clean cells, cell assemblies, glassware, leads, electrical connections, and battery poles, using scrapers, steam, water, emery cloths, power grinders, or acid.Supplemental11706
Rewind coils on cores in slots, or make replacement coils, using coil-winding machines.Supplemental11708
Weld, braze, or solder electrical connections.Core11703
Remove and replace defective parts such as coil leads, carbon brushes, and wires, using soldering equipment.Supplemental11700
Hammer out dents and twists in tools and equipment.Supplemental11726
Seal joints with putty, mortar, and asbestos, using putty extruders and knives.Supplemental11725
Repair and operate battery-charging equipment.Supplemental11722
Sharpen tools such as saws, picks, shovels, screwdrivers, and scoops, either manually or by using bench grinders and emery wheels.Supplemental11724
Test battery charges, and replace or recharge batteries as necessary.Supplemental11721

Technology Skills

From O*NET 30.3, 12 examples in 11 categories, 9 Hot Technology

Free · O*NET 30.3

Computer aided design CAD software

Autodesk AutoCADHot Technology

Analytical or scientific software

Commutator profiling software
Motor testing software

Facilities management software

Computerized maintenance management system CMMS

Data base user interface and query software

Microsoft AccessHot Technology

Spreadsheet software

Microsoft ExcelHot Technology

Office suite software

Microsoft Office softwareHot Technology

Electronic mail software

Microsoft OutlookHot Technology

Presentation software

Microsoft PowerPointHot Technology

Word processing software

Microsoft WordHot Technology

Object or component oriented development software

PythonHot Technology

Enterprise resource planning ERP software

SAP softwareHot Technology

Detailed Work Activities

From O*NET 30.3, under their work activities; open one for the AI skills Workforce Automation maps to it

Free · O*NET 30.3

Getting Information

Read work orders or descriptions of problems to determine repairs or modifications needed.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Read technical information needed to perform maintenance or repairs.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Inspecting Equipment, Structures, or Materials

Inspect mechanical equipment to locate damage, defects, or wear.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Inspect electrical or electronic systems for defects.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Test mechanical equipment to ensure proper functioning.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Measure equipment outputs.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Test electrical circuits or components for proper functioning.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Performing General Physical Activities

Clean equipment, parts, or tools to repair or maintain them in good working order.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Handling and Moving Objects

Install insulation in equipment or structures.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Fabricate parts or components.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Rewire electrical or electronic systems.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Solder parts or connections between parts.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Braze metal parts or components.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Seal gaps or cracks to prevent leakage or moisture intrusion.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Assemble electrical components, subsystems, or systems.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Reassemble equipment after repair.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Adjust equipment to ensure optimal performance.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Cut materials according to specifications or needs.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Remove dents from equipment, materials, tools or structures.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Smooth surfaces of objects or equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Disassemble equipment for maintenance or repair.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Remove parts or components from equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Controlling Machines and Processes

Operate cranes, hoists, or other moving or lifting equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Repairing and Maintaining Mechanical Equipment

Replace worn, damaged, or defective mechanical parts.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Repair defective engines or engine components.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Rebuild parts or components.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Repairing and Maintaining Electronic Equipment

Sharpen cutting or grinding tools.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Lubricate equipment to allow proper functioning.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Repair electronic equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Repair electrical components.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Documenting/Recording Information

Maintain repair or maintenance records.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Communicating with Supervisors, Peers, or Subordinates

Communicate with coworkers to coordinate installations or repairs.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Monitoring and Controlling Resources

Maintain inventories of materials, equipment, or products.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Job Zone

From O*NET 30.3

Free · O*NET 30.3

Job Zone Three: Medium Preparation Needed

Workforce Automation analysis, not part of the source

WFA coverage: AI skills for this job

WFA · Part of the paid plan when accounts open

Pilot mapping: these skill links come from our seed list and haven’t been reviewed yet. Expect them to change as each one is checked.

DWAs covered by an AI skill0 of 33

Distinct tools0

Level mix

No tools yet

Equivalents

NICE work roles, with their DCWF equivalents

Mapped to this job by the ETO-CSET NICE/O*NET crosswalk (2024); roles from NICE Framework Components v2.2.0, DCWF equivalents from DoD DCWF Tool v5.3 (2026-09-25)

Free · NICE Framework Components v2.2.0 and DoD DCWF Tool v5.3 (2026-09-25)

No NICE work role maps to this job.