Skip to content

O*NET-SOC 49-3011.00

Aircraft Mechanics and Service Technicians

Diagnose, adjust, repair, or overhaul aircraft engines and assemblies, such as hydraulic and pneumatic systems.

From O*NET 30.3

Tasks

From O*NET 30.3, by importance, as O*NET OnLine lists them

Free · O*NET 30.3
  1. Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation.Core9947
  2. Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components.Core9946
  3. Maintain repair logs, documenting all preventive and corrective aircraft maintenance.Core9948
  4. Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems.Core9950
  5. Conduct routine and special inspections as required by regulations.Core9949
  6. Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment.Core9954
  7. Inspect airframes for wear or other defects.Core9951
  8. Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment.Core9977
  9. Measure parts for wear, using precision instruments.Core9955
  10. Remove or install aircraft engines, using hoists or forklift trucks.Core9967
  11. Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and or moving parts.Core9965
  12. Test operation of engines and other systems, using test equipment, such as ignition analyzers, compression checkers, distributor timers, or ammeters.Core9957
  13. Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools.Core9956
  14. Reassemble engines following repair or inspection and reinstall engines in aircraft.Core9959
  15. Maintain, repair, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, or seals.Core9952
  16. Measure the tension of control cables.Core9953
  17. Read and interpret pilots' descriptions of problems to diagnose causes.Core9960
  18. Determine repair limits for engine hot section parts.Supplemental9979
  19. Obtain fuel and oil samples and check them for contamination.Core9958
  20. Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft.Core9966
  21. Listen to operating engines to detect and diagnose malfunctions, such as sticking or burned valves.Core9981
  22. Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches.Core9970
  23. Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts.Core9972
  24. Inventory and requisition or order supplies, parts, materials, and equipment.Core9968
  25. Clean, refuel, and change oil in line service aircraft.Core9971
  26. Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications.Core9961
  27. Disassemble engines and inspect parts, such as turbine blades or cylinders, for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment.Supplemental9978
  28. Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels.Core9974
  29. Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks.Supplemental9983
  30. Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.Core9962
  31. Accompany aircraft on flights to make in-flight adjustments and corrections.Core9982
  32. Locate and mark dimensions and reference lines on defective or replacement parts, using templates, scribes, compasses, and steel rules.Core9963
  33. Spread plastic film over areas to be repaired to prevent damage to surrounding areas.Core9976
  34. Fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders.Core9969
  35. Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding.Core9964
  36. Trim and shape replacement body sections to specified sizes and fits and secure sections in place, using adhesives, hand tools, and power tools.Supplemental9973
  37. Cure bonded structures, using portable or stationary curing equipment.Supplemental9980
  38. Prepare and paint aircraft surfaces.Supplemental9975

Technology Skills

From O*NET 30.3, 24 examples in 16 categories, 7 Hot Technology

Free · O*NET 30.3

Facilities management software

  • Access Software AIRPAX
  • Maintenance information databases
  • Maintenance planning software
  • Maintenance record software

Analytical or scientific software

  • CaseBank SpotLight
  • Engine analysis software

Information retrieval or search software

  • Computerized aircraft log manager CALM
  • Technical manual database software

Accounting software

  • DatcoMedia EBis

Compiler and decompiler software

  • Disassembler software

Spreadsheet software

  • Microsoft ExcelHot Technology

Office suite software

  • Microsoft Office softwareHot TechnologyIn Demand

Electronic mail software

  • Microsoft OutlookHot Technology

Presentation software

  • Microsoft PowerPointHot Technology

Operating system software

  • Microsoft WindowsHot Technology

Word processing software

  • Microsoft WordHot Technology

Data base user interface and query software

  • Mxi Technologies Maintenix
  • Operational Data Store ODS software
  • Pentagon 2000SQL

Enterprise resource planning ERP software

  • SAP softwareHot Technology
  • Tracware AeroTrac

Inventory management software

  • Supply system software

Document management software

  • Technical Data Management System TDMS

Internet browser software

  • Web browser software

Detailed Work Activities

From O*NET 30.3, under their work activities; open one for the AI skills Workforce Automation maps to it

Free · O*NET 30.3

Getting Information

  • Read work orders or descriptions of problems to determine repairs or modifications needed.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Read technical information needed to perform maintenance or repairs.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Monitoring Processes, Materials, or Surroundings

  • Observe equipment in operation to detect potential problems.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Inspecting Equipment, Structures, or Materials

  • Test fluids to identify contamination or other problems.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Inspect mechanical components of vehicles to identify problems.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Inspect structural components of vehicles to identify problems.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Inspect completed work to ensure proper functioning.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Inspect mechanical equipment to locate damage, defects, or wear.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Test mechanical equipment to ensure proper functioning.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Making Decisions and Solving Problems

  • Troubleshoot equipment or systems operation problems.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Performing General Physical Activities

  • Clean equipment, parts, or tools to repair or maintain them in good working order.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Apply protective coverings to objects or surfaces near work areas.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Move large objects using heavy equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Handling and Moving Objects

  • Fabricate parts or components.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Drill holes in parts, equipment, or materials.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Paint surfaces or equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Align equipment or machinery.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Lay out work according to specifications.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Install piping for installation or maintenance activities.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Assemble electrical components, subsystems, or systems.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Reassemble equipment after repair.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Install machine or equipment replacement parts.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Cut materials according to specifications or needs.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Disassemble equipment to inspect for deficiencies.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Remove parts or components from equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Install electrical components, equipment, or systems.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Controlling Machines and Processes

  • Operate heating or drying equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Operate cranes, hoists, or other moving or lifting equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment

  • Determine operational criteria or specifications.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Repairing and Maintaining Mechanical Equipment

  • Replace worn, damaged, or defective mechanical parts.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Repair worn, damaged, or defective mechanical parts.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Service vehicles to maintain functionality.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Repairing and Maintaining Electronic Equipment

  • Lubricate equipment to allow proper functioning.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Documenting/Recording Information

  • Maintain repair or maintenance records.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Communicating with Supervisors, Peers, or Subordinates

  • Communicate with coworkers to coordinate installations or repairs.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Monitoring and Controlling Resources

  • Maintain inventories of materials, equipment, or products.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Order materials, supplies, or equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Job Zone

From O*NET 30.3

Free · O*NET 30.3

Job Zone Three: Medium Preparation Needed

Workforce Automation analysis, not part of the source

WFA coverage: AI skills for this job

WFA · Part of the paid plan when accounts open

Pilot mapping: these skill links come from our seed list and haven’t been reviewed yet. Expect them to change as each one is checked.

DWAs covered by an AI skill0 of 38
Distinct tools0
Level mix
  • No tools yet

Equivalents

NICE work roles, with their DCWF equivalents

Mapped to this job by the ETO-CSET NICE/O*NET crosswalk (2024); roles from NICE Framework Components v2.2.0, DCWF equivalents from DoD DCWF Tool v5.3 (2026-09-25)

Free · NICE Framework Components v2.2.0 and DoD DCWF Tool v5.3 (2026-09-25)

No NICE work role maps to this job.