Skip to content

O*NET-SOC 51-4022.00

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

From O*NET 30.3

Tasks

From O*NET 30.3, by importance, as O*NET OnLine lists them

Free · O*NET 30.3
  1. Read work orders or blueprints to determine specified tolerances and sequences of operations for machine setup.Core10079
  2. Position and move metal wires or workpieces through a series of dies that compress and shape stock to form die impressions.Core10086
  3. Measure and inspect machined parts to ensure conformance to product specifications.Core10078
  4. Set up, operate, or tend presses and forging machines to perform hot or cold forging by flattening, straightening, bending, cutting, piercing, or other operations to taper, shape, or form metal.Core10085
  5. Turn handles or knobs to set pressures and depths of ram strokes and to synchronize machine operations.Core10082
  6. Install, adjust, and remove dies, synchronizing cams, forging hammers, and stop guides, using overhead cranes or other hoisting devices, and hand tools.Core10087
  7. Start machines to produce sample workpieces, and observe operations to detect machine malfunctions and to verify that machine setups conform to specifications.Core10080
  8. Confer with other workers about machine setups and operational specifications.Core10083
  9. Trim and compress finished forgings to specified tolerances.Core10089
  10. Remove dies from machines when production runs are finished.Core10081
  11. Repair, maintain, and replace parts on dies.Core10084
  12. Select, align, and bolt positioning fixtures, stops, and specified dies to rams and anvils, forging rolls, or presses and hammers.Supplemental10088
  13. Sharpen cutting tools and drill bits, using bench grinders.Supplemental10090

Technology Skills

From O*NET 30.3, 3 examples in 3 categories, 0 Hot Technology

Free · O*NET 30.3

Electronic mail software

  • Email software

Inventory management software

  • Inventory tracking software

Industrial control software

  • Machine control software

Detailed Work Activities

From O*NET 30.3, under their work activities; open one for the AI skills Workforce Automation maps to it

Free · O*NET 30.3

Getting Information

  • Study blueprints or other instructions to determine equipment setup requirements.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Inspecting Equipment, Structures, or Materials

  • Conduct test runs of production equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Estimating the Quantifiable Characteristics of Products, Events, or Information

  • Measure dimensions of completed products or workpieces to verify conformance to specifications.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Making Decisions and Solving Problems

  • Select production equipment according to product specifications.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Handling and Moving Objects

  • Set equipment guides, stops, spacers, or other fixtures.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Mount attachments or tools onto production equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Maneuver workpieces in equipment during production.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Trim excess material from workpieces.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Remove accessories, tools, or other parts from equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Controlling Machines and Processes

  • Operate metal or plastic forming equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Operate grinding equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Operate cutting equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Repairing and Maintaining Mechanical Equipment

  • Replace worn equipment components.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Repair production equipment or tools.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Repairing and Maintaining Electronic Equipment

  • Sharpen cutting or grinding tools.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet
  • Maintain production or processing equipment.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Communicating with Supervisors, Peers, or Subordinates

  • Exchange information with colleagues.
    WFA · Part of the paid plan when accounts open

    WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level

    • No tools yet
    • Not mapped yet

Job Zone

From O*NET 30.3

Free · O*NET 30.3

Job Zone 1-2: Very Little to Some Preparation Needed

Workforce Automation analysis, not part of the source

WFA coverage: AI skills for this job

WFA · Part of the paid plan when accounts open

Pilot mapping: these skill links come from our seed list and haven’t been reviewed yet. Expect them to change as each one is checked.

DWAs covered by an AI skill0 of 17
Distinct tools0
Level mix
  • No tools yet

Equivalents

NICE work roles, with their DCWF equivalents

Mapped to this job by the ETO-CSET NICE/O*NET crosswalk (2024); roles from NICE Framework Components v2.2.0, DCWF equivalents from DoD DCWF Tool v5.3 (2026-09-25)

Free · NICE Framework Components v2.2.0 and DoD DCWF Tool v5.3 (2026-09-25)

No NICE work role maps to this job.