O*NET-SOC 51-4122.00

Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders

Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, solder, or heat treat metal products, components, or assemblies. Includes workers who operate laser cutters or laser-beam machines.

From O*NET 30.3

Tasks

From O*NET 30.3, by importance, as O*NET OnLine lists them

Free · O*NET 30.3

Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.Core10274
Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.Core10271
Add chemicals or materials to workpieces or machines to facilitate bonding or to cool workpieces.Supplemental10291
Record operational information on specified production reports.Core10272
Correct problems by adjusting controls or by stopping machines and opening holding devices.Core10270
Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies.Core10267
Select torch tips, alloys, flux, coil, tubing, or wire, according to metal types or thicknesses, data charts, or records.Core10282
Lay out, fit, or connect parts to be bonded, calculating production measurements, as necessary.Core10276
Prepare metal surfaces or workpieces, using hand-operated equipment, such as grinders, cutters, or drills.Core10284
Mark weld points and positions of components on workpieces, using rules, squares, templates, or scribes.Core10292
Set dials and timing controls to regulate electrical current, gas flow pressure, heating or cooling cycles, or shut-off.Core10286
Turn and press knobs and buttons or enter operating instructions into computers to adjust and start welding machines.Core10266
Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.Core10275
Conduct trial runs before welding, soldering, or brazing, and make necessary adjustments to equipment.Core10277
Tend auxiliary equipment used in welding processes.Supplemental10287
Give directions to other workers regarding machine set-up and use.Core10269
Clean, lubricate, maintain, and adjust equipment to maintain efficient operation, using air hoses, cleaning fluids, and hand tools.Core10285
Select, position, align, and bolt jigs, holding fixtures, guides, or stops onto machines, using measuring instruments and hand tools.Core10281
Remove completed workpieces or parts from machinery, using hand tools.Core10279
Compute and record settings for new work, applying knowledge of metal properties, principles of welding, and shop mathematics.Supplemental10283
Observe meters, gauges, or machine operations to ensure that soldering or brazing processes meet specifications.Core10280
Anneal finished workpieces to relieve internal stress.Supplemental10293
Load or feed workpieces into welding machines to join or bond components.Supplemental10268
Transfer components, metal products, or assemblies, using moving equipment.Core10290
Fill hoppers and position spouts to direct flow of flux or manually brush flux onto seams of workpieces.Supplemental10289
Start, monitor, and adjust robotic welding production lines.Supplemental10273
Devise or build fixtures or jigs used to hold parts in place during welding, brazing, or soldering.Core10288
Dress electrodes, using tip dressers, files, emery cloths, or dressing wheels.Supplemental10278
Immerse completed workpieces into water or acid baths to cool and clean components.Supplemental10294

Technology Skills

From O*NET 30.3, 10 examples in 8 categories, 8 Hot Technology

Free · O*NET 30.3

Electronic mail software

Email software
Microsoft OutlookHot Technology

Operating system software

LinuxHot Technology
Microsoft WindowsHot Technology

Spreadsheet software

Microsoft ExcelHot Technology

Office suite software

Microsoft Office softwareHot Technology

Presentation software

Microsoft PowerPointHot Technology

Word processing software

Microsoft WordHot Technology

Enterprise resource planning ERP software

SAP softwareHot Technology

Industrial control software

Tool center point TCP setting software

Detailed Work Activities

From O*NET 30.3, under their work activities; open one for the AI skills Workforce Automation maps to it

Free · O*NET 30.3

Getting Information

Review blueprints or other instructions to determine operational methods or sequences.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Read work orders or other instructions to determine product specifications or materials requirements.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Monitoring Processes, Materials, or Surroundings

Monitor equipment operation to ensure proper functioning.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Inspecting Equipment, Structures, or Materials

Conduct test runs of production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Estimating the Quantifiable Characteristics of Products, Events, or Information

Measure dimensions of completed products or workpieces to verify conformance to specifications.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Making Decisions and Solving Problems

Calculate specific material, equipment, or labor requirements for production.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Select production equipment according to product specifications.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Performing General Physical Activities

Clean production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Load materials into production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Move products, materials, or equipment between work areas.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Handling and Moving Objects

Apply solutions to production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Solder parts or workpieces.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Operate welding equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Assemble metal or plastic parts or products.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Remove products or workpieces from production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Lay out parts to prepare for assembly.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Align parts or workpieces to ensure proper assembly.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Draw guide lines or markings on materials or workpieces using patterns or other references.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Assemble machine tools, parts, or fixtures.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Feed materials or products into or through equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Mount attachments or tools onto production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Reshape metal workpieces to established specifications.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Adjust flow of electricity to tools or production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Adjust equipment controls to regulate gas flow.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Immerse objects or workpieces in cleaning or coating solutions.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Heat material or workpieces to prepare for or complete production.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Controlling Machines and Processes

Operate grinding equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Operate cutting equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Working with Computers

Enter commands, instructions, or specifications into equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment

Design tools, fixtures, or other devices for production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Repairing and Maintaining Electronic Equipment

Apply lubricants or coolants to workpieces.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Lubricate production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Maintain production or processing equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Documenting/Recording Information

Record operational or production data.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Guiding, Directing, and Motivating Subordinates

Direct operational or production activities.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Job Zone

From O*NET 30.3

Free · O*NET 30.3

Job Zone 1-2: Very Little to Some Preparation Needed

Workforce Automation analysis, not part of the source

WFA coverage: AI skills for this job

WFA · Part of the paid plan when accounts open

Pilot mapping: these skill links come from our seed list and haven’t been reviewed yet. Expect them to change as each one is checked.

DWAs covered by an AI skill0 of 35

Distinct tools0

Level mix

No tools yet

Equivalents

NICE work roles, with their DCWF equivalents

Mapped to this job by the ETO-CSET NICE/O*NET crosswalk (2024); roles from NICE Framework Components v2.2.0, DCWF equivalents from DoD DCWF Tool v5.3 (2026-09-25)

Free · NICE Framework Components v2.2.0 and DoD DCWF Tool v5.3 (2026-09-25)

No NICE work role maps to this job.