O*NET-SOC 51-6064.00

Textile Winding, Twisting, and Drawing Out Machine Setters, Operators, and Tenders

Set up, operate, or tend machines that wind or twist textiles; or draw out and combine sliver, such as wool, hemp, or synthetic fibers. Includes slubber machine and drawing frame operators.

From O*NET 30.3

Tasks

From O*NET 30.3, by importance, as O*NET OnLine lists them

Free · O*NET 30.3

Observe bobbins as they are winding and cut threads to remove loaded bobbins, using knives.Supplemental14202
Notify supervisors or mechanics of equipment malfunctions.Core14183
Thread yarn, thread, or fabric through guides, needles, and rollers of machines.Core14190
Unwind lengths of yarn, thread, or twine from spools and wind onto bobbins.Supplemental14201
Start machines, monitor operation, and make adjustments as needed.Core14184
Inspect machinery to determine whether repairs are needed.Core14192
Record production data such as numbers and types of bobbins wound.Core14195
Replace depleted supply packages with full packages.Core14188
Stop machines when specified amount of products has been produced.Core14196
Adjust machine settings such as speed or tension to produce products that meet specifications.Supplemental14203
Inspect products to verify that they meet specifications and to determine whether machine adjustment is needed.Core14186
Tend machines that twist together two or more strands of yarn or insert additional twists into single strands of yarn to increase strength, smoothness, or uniformity of yarn.Core14187
Study guides, samples, charts, and specification sheets, or confer with supervisors or engineering staff to determine setup requirements.Supplemental14197
Tend spinning frames that draw out and twist roving or sliver into yarn.Supplemental14200
Remove spindles from machines and bobbins from spindles.Supplemental14205
Observe operations to detect defects, malfunctions, or supply shortages.Core14189
Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.Supplemental14199
Place bobbins on spindles and insert spindles into bobbin-winding machines.Supplemental14193
Tend machines with multiple winding units that wind thread onto shuttle bobbins for use on sewing machines or other kinds of bobbins for sole-stitching, knitting, or weaving machinery.Supplemental14185
Repair or replace worn or defective parts or components, using hand tools.Supplemental14206
Operate machines for test runs to verify adjustments and to obtain product samples.Core14191
Measure bobbins periodically, using gauges, and turn screws to adjust tension if bobbins are not of specified size.Supplemental14198
Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.Supplemental14204

Technology Skills

From O*NET 30.3, 4 examples in 4 categories, 4 Hot Technology

Free · O*NET 30.3

Spreadsheet software

Microsoft ExcelHot Technology

Office suite software

Microsoft Office softwareHot Technology

Electronic mail software

Microsoft OutlookHot Technology

Word processing software

Microsoft WordHot Technology

Detailed Work Activities

From O*NET 30.3, under their work activities; open one for the AI skills Workforce Automation maps to it

Free · O*NET 30.3

Getting Information

Study blueprints or other instructions to determine equipment setup requirements.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Monitoring Processes, Materials, or Surroundings

Monitor equipment operation to ensure proper functioning.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Watch operating equipment to detect malfunctions.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Inspecting Equipment, Structures, or Materials

Inspect textile products.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Inspect production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Conduct test runs of production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Estimating the Quantifiable Characteristics of Products, Events, or Information

Measure dimensions of completed products or workpieces to verify conformance to specifications.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Performing General Physical Activities

Clean production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Load materials into production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Handling and Moving Objects

Remove products or workpieces from production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Install mechanical components in production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Feed materials or products into or through equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Mount attachments or tools onto production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Mount materials or workpieces onto production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Set equipment controls to meet cutting specifications.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Cut fabrics.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Remove accessories, tools, or other parts from equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Controlling Machines and Processes

Operate textile cutting or production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Repairing and Maintaining Mechanical Equipment

Replace worn equipment components.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Repair production equipment or tools.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Repairing and Maintaining Electronic Equipment

Lubricate production equipment.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Documenting/Recording Information

Record operational or production data.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Communicating with Supervisors, Peers, or Subordinates

Exchange information with colleagues.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet
Notify others of equipment repair or maintenance needs.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Monitoring and Controlling Resources

Maintain inventories of materials, equipment, or products.
WFA · Part of the paid plan when accounts open
WFA (Workforce Automation) analysis: 0 of 0 AI skills mapped to this activity, by automation level
- No tools yet
- Not mapped yet

Job Zone

From O*NET 30.3

Free · O*NET 30.3

Job Zone 1-2: Very Little to Some Preparation Needed

Workforce Automation analysis, not part of the source

WFA coverage: AI skills for this job

WFA · Part of the paid plan when accounts open

Pilot mapping: these skill links come from our seed list and haven’t been reviewed yet. Expect them to change as each one is checked.

DWAs covered by an AI skill0 of 25

Distinct tools0

Level mix

No tools yet

Equivalents

NICE work roles, with their DCWF equivalents

Mapped to this job by the ETO-CSET NICE/O*NET crosswalk (2024); roles from NICE Framework Components v2.2.0, DCWF equivalents from DoD DCWF Tool v5.3 (2026-09-25)

Free · NICE Framework Components v2.2.0 and DoD DCWF Tool v5.3 (2026-09-25)

No NICE work role maps to this job.